Take a look at this acrylic manifold we made for one of our customers. It features four ports connected to a main track. Each port features thread-milled threads.
This part also showcases our vapor polishing process. Not only can we polish the exterior of a part, we can polish interior features that would not normally be able to be polished otherwise.
The mainfold is approximately 3″ x 1″ x 3/4″
This part is made out a Delrin-AF, a blend of delrin and teflon. The most striking feature is the helical slot that is machined on the OD. The slot width is tightly toleranced at ±.00025. It also features an OD groove and counterbores on each end. Our machining process allows us to produce these parts with minimal to no burrs so secondary operations are not needed in most cases.
This is an example of some of the Acrylic work we can do in our lathe department.
This part has a few different features. The front face has a knife edge where it blends with the inside diameter. It also has a 3 barbs machined on the outside diameter. There is also a groove and contouring on the rest of the OD.
The inside diameter is drilled thru and features a counterbore on the knife edge (end facing up)
